5photosHydrovac Trucks For Sale in Saskatchewan
Vac4Sale has 1 listing for hydrovac trucks in Saskatchewan, priced $30,587,000. A hydrovac truck uses pressurized water and a high-airflow vacuum to excavate soil without mechanical digging, making it the standard tool for safe digging around buried utilities.
Every listing below is posted by the party that owns the equipment, with direct seller contact and whatever hours, tank and pump specifications that seller published. Units are located in or near Saskatchewan; buyers routinely purchase across state and provincial lines and float or drive the unit home, so treat location as a freight cost rather than a hard filter.
- Live listings
- 1
- Lowest asking (USD)
- $30,587,000
- Median asking (USD)
- $30,587,000
- Highest asking (USD)
- $30,587,000
- Model years
- 2023
- States & provinces
- 1
Hydrovac trucks in Saskatchewan available now
- 5photos
What hydrovac trucks in Saskatchewan cost
Across the 1 listing for hydrovac trucks in Saskatchewan that publish a price, asking prices run $30,587,000 to $30,587,000, with a median of $30,587,000. Figures are asking prices in US dollars, converted at an indicative rate where the seller listed in Canadian dollars, and they move with engine hours, tank capacity and cold-weather equipment far more than with chassis mileage.
What to check before buying
Two units with the same year and the same hours can be worth tens of thousands of dollars apart. These are the specifications and documents to ask a seller for before comparing hydrovac trucks in Saskatchewan on price.
- Debris tank and water capacity
- Tank size decides how long a crew works between dumps. Around 12 cubic yards of debris capacity with 1,300 gallons of fresh water is the common utility and daylighting spec; 15 cubic yards and 1,500 gallons or more pays for itself on pipeline work where the nearest dump site is an hour away.
- Blower airflow and vacuum
- Airflow in CFM and vacuum in inches of mercury set how deep and how fast the unit lifts spoil. Roughly 5,000 CFM from a positive displacement blower covers standard potholing; deeper digs and long hose runs want a higher rated blower. Ask when the blower was last rebuilt, not just what it is rated at.
- Water pump pressure and flow
- Cutting speed in hard clay comes from the water system: 10 GPM at 3,000 PSI is a typical utility spec. Confirm the pressure holds under load rather than reading it off a spec sheet.
- Cold weather package
- A boiler or hot box, heated valves and a tank heater are what make a hydrovac a year round truck. Without a working heat package the unit is a summer-only asset in any northern market, and retrofitting one is expensive.
- Boom reach, diameter and rotation
- Boom length, hose diameter and rotation arc decide what an operator reaches without repositioning the truck. An 8-inch boom at 27 feet with around 335 degrees of rotation is a common utility configuration.
- Chassis, axles and legal weight
- A full debris tank is heavy. Check the axle configuration and GVWR against the weight limits where the truck will actually work, because a tandem that is legal in one state runs overweight in another.
Read the full vac truck buying guide for inspection procedure, hour and mileage bands, tank certification and how to close the purchase safely.
Frequently asked questions
Are there hydrovac trucks for sale in Saskatchewan?
Yes. Vac4Sale has 1 listing for hydrovac trucks in Saskatchewan right now, offered by dealers and owner-operators located in or shipping to Saskatchewan. A hydrovac truck uses pressurized water and a high-airflow vacuum to excavate soil without mechanical digging, making it the standard tool for safe digging around buried utilities.
How much do hydrovac trucks in Saskatchewan cost?
Hydrovac trucks in Saskatchewan listed on Vac4Sale run $30,587,000, with a median asking price of $30,587,000 across 1 listing that quote a figure. Prices in this market are set mainly by engine hours, tank and pump capacity, and whether the unit carries a working cold-weather package — a low-hour machine with a documented rebuild routinely sells above a higher-spec one without records.
What should I check before buying a hydrovac truck in Saskatchewan?
Before buying a hydrovac truck in Saskatchewan, check debris tank and water capacity, blower airflow and vacuum, water pump pressure and flow, cold weather package and boom reach, diameter and rotation. Ask for engine hours and chassis mileage together, the most recent tank certification, and documented rebuild dates for the blower or vacuum pump. Insist on seeing the vacuum and water systems run under real load rather than at idle — cracked seals, weak vacuum and overheating hydraulics are all invisible on a truck idling in a yard.
Can I buy a hydrovac truck from outside Saskatchewan?
Yes, and most buyers do. Hydrovac Trucks are routinely bought across state, provincial and national lines and driven or floated home, so restricting a search to one state cuts out most of the market. Budget for transport, and confirm that tank certification and registration requirements in Saskatchewan are satisfied by the unit configuration before you commit.
Does Vac4Sale sell hydrovac trucks directly?
Vac4Sale is a listings marketplace, not a dealer. Every unit is offered by the dealer or owner-operator who owns it, and buyers contact that seller directly through the listing page — Vac4Sale does not broker the sale, take a commission on it, or hold funds. Inspect the equipment and verify title and tank certification with the seller before any money changes hands.
Keep looking
Selling a vac truck?
List it in front of buyers who are already searching for exactly this equipment. Photos, full specs and direct buyer contact — no commission on the sale.